Traktor audio 6 external mixer setup11/17/2023 ![]() ![]() If the effect returns on your mixer have dedicated volume knobs, make sure they are turned up and the return signal is added to the mix. You can now add the selected TRAKTOR effect units to your external mix by activating the effects sends on your DJ-mixer via the corresponding knobs or buttons. ![]() In Send mode, the effect units become independent from TRAKTOR’s internal signal flow and can only be used with the send effect function of your external mixer. If you use more than one effect unit in Send mode, they are chained in the order FX1 > FX2 > FX3 > FX4. If you just want the first effect unit to be fed from the Send of your external mixer, set the FX1 to Send and keep the Insert setting for the other effect units. Under FX Unit Routing you can choose which effect units are added to your Send Effect configuration. Finally, open the Effects Preferences.Outputs connected to line inputs on external mixer. BOOTH AND STUDIO INSTALLATION USING DIRECT THRU: Direct Thru setup: Two turntables connected to phono inputs of TRAKTOR AUDIO 6. In our example, we set the Input FX Send (Ext)to 9: Ch D Left and 10: Ch D Right. Internal mixer setup: TRAKTOR AUDIO 6 connected to active monitors and headphones. The Input FX Send (Ext) needs to be set to the input channels of your soundcard to which you connected the mixer`s send output in step 1. Go to the Input Routing tab of the Preferences.In our example, we set the Output FX Return to 9: Ch D Left and 10: Ch D Right. The Output FX Return needs to be set to the output channels of your soundcard to which you connected the mixer`s return input in step 2. Open TRAKTOR Preferences > Output Routing.In our example, we are using the FX1 input from the FX RETURNS section on the Xone 4D and the D OUT ports (Ch. Plug a standard RCA cable to the return input of your mixer and connect it to a free output on your soundcard.Hardware The Audio 10 has 10 ins/out including 4 stereo phono preamps, mic, headphones and Midi, the Audio 6. In our example, we are using the FX1 SEND output on the Xone 4D and the D IN ports (Ch. S4 owners get a free upgrade to Traktor Pro 2. Plug a standard RCA cable to the send output of your mixer and connect it to a free input on your soundcard.In this example, we are using the TRAKTOR AUDIO 10 soundcard and an Allen & Heath Xone 4D mixer. Additionally, you will need one free stereo input and one free stereo output on your soundcard. This has important implications regarding the handling of output levels (channel volume fader, channel gain and main output). Background Information As opposed to analog mixing, DJ software mixes audio signals digitally. Note that this configuration requires an external DJ-mixer with effect send outputs and effect return inputs. Setting up TRAKTOR for External Mixing Changes in TRAKTOR PRO 3 1. Especially with a 2-Deck Scratch Control setup this is a convenient way to add TRAKTOR`s effects to your external mix. This guide will help you to use the internal effects in TRAKTOR PRO as Send Effects from your external DJ-mixer. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |